ISSN (ONLINE) : 2454-9762 ISSN (PRINT) : 2454-9762
Rajalakshmi Institute of Technology, Kuthambakkam(PO), Chennai-600124, Tamil Nadu, India
Department of Mechanical Engineering Organizes
National Conference on Recent Innovations and Trends in Mechanical Engineering
(NCRITME’17)
(http://www.ritchennai.org)
(23rd & 24th March 2017)
Volume 3,Special Issue 9,March 2017
Department of Mechanical Engineering Organizes
National Conference on Recent Innovations and Trends in Mechanical Engineering
(NCRITME’17)
(http://www.ritchennai.org)
(23rd & 24th March 2017)
Volume 3,Special Issue 9,March 2017
| Title | Authors | Download | Qr Code |
|---|---|---|---|
| CONFERENCE COLLABORATION | National Conference on Recent Innovations and Trends in Mechanical Engineering (NCRITME 17), Department of Mechanical Engineering, Rajalakshmi Institute of Technology, Kuthambakkam(PO), Chennai-600124, Tamil Nadu, India |
Full Paper doi> 10.20256/IJARMATE.2017.03S0903001 |
|
| CHARACTERIZATION OF TENSILE STRENGTH OF ALUMINIUM BASED BASALT MATRIX COMPOSITE | S K Rajesh Kanna |
Full Paper doi> 10.20256/IJARMATE.2017.03S0903002 |
|
| APPLICATION OF FIREFLY ALGORITHM AND ITS PARAMETER SETTING FOR JOB SHOP SCHEDULING | S. K. Rajesh Kanna |
Full Paper doi> 10.20256/IJARMATE.2017.03S0903003 |
|
| ANALYSIS OF HEAT TRANSFER RATE IN EVACUATED TUBE TYPE SOLAR WATER HEATER BY GREEN HOUSE EFFECT | Franklin Merlin. R, Vineeth. K, Rajeev Babu Raja. K, Vijayamaruthi. D |
Full Paper doi> 10.20256/IJARMATE.2017.03S0903004 |
|
| Design And Fabrication Of Solar Air Humidifier | P . Sethuramalingam K . Hareesh, S . Aravind, T . Arumugam Sriram |
Full Paper doi> 10.20256/IJARMATE.2017.03S0903005 |
|
| DESIGN AND ANALYSIS OF COMBINED SUSPENSION SYSTEM | V.Gopal,S.Mohammed Issarullah., K.Mahesh Kumar |
Full Paper doi> 10.20256/IJARMATE.2017.03S0903006 |
|
| QUALITY IMPROVEMENT AND DEFECT REDUCTION IN HIGH PRESSURE STEAM TURBINE CASTING JOINTS | V.Gopal, Amaanullah Sheriff.R, J.Rajasekaran A.Venkatesan |
Full Paper doi> 10.20256/IJARMATE.2017.03S0903007 |
|
| PROCESSING AND CHARACTERIZATION OF JUTE FIBER REINFORCED POLYMER COMPOSITES WITH FLY ASH BEST RESEARCH PAPER OF THE ISSUE |
S K Rajesh Kanna |
Full Paper doi> 10.20256/IJARMATE.2017.03S0903008 |
|
| ï€ EMERGENCY BRAKING SYSTEM IN AUTOMOBILE USING EDDY CURRENT BRAKING | Karthikeyan B, Goverthana Raj M, Guru Ganesh K, Mohan Raj M,Navaneetha Krishnan |
Full Paper doi> 10.20256/IJARMATE.2017.03S0903009 |
|
| Crack Detection in Brake Disc by Modal Analysis | K.Mahesh Kumar V.Gopal A.Venkatesan, S.Harivenkataramani |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030010 |
|
| Numerical Energy Analysis of Solar Parabolic Dish Thermoelectric Generator | G.Muthu, A. Venkatesan |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030011 |
|
| DESIGN AND FABRICATION OF BATTERY POWER OPERATED SEGWAY | Mr. Muthu Vijayan I, Mr. Anirudh S,Mr. Kameshwaran K, Mr. P. Sethuramalingam |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030012 |
|
| Effect Of Aluminium Oxide Nanoparticles As Additive In Jatropha Oil On Performance And Emission Characteristics Of A Ci Engine | Pragatheeswaran V, Gajendiran M, Nallusamy N |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030013 |
|
| Design and Analysis of Piston by Using Finite Element Method | M.Prakash , N.Rajesh , K.Sureshkumar , G.Vignesh and D.Manivannan |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030014 |
|
| ï€ Comparisonal Analysis on Effects of Processing Parameters on Microstructural and Mechanical Behaviour of Underwater Friction Stir Welding (UWFSW) Of Al6082 | P. Prem Kumar, G.K.Thirumaran, R.VijayaRaghavan |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030015 |
|
| ANALYSIS AND PERFORMANCE ENHANCEMENT OF REGENERATIVE TURBINE PUMP | Rajesh. R, Dr.Sundareswaran. V, Purushothman. S |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030016 |
|
| EXPERIMENTAL INVESTIGATION OF POLYMER MATRIX COMPOSITE GEARS WITH DIFFERENT FIBRE PROPORTIONS | K.Senthilnathan, S.Ilayavel , G.Suresh |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030017 |
|
| Computational Analysis of Performance of Solar Photovoltaic Thermal System | Venkatesan A V.Gopal K.MahesKumar Puja Priyadharshini N and Sooraj R krishnan |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030018 |
|
| LASER WELDING AND ITS PROCESS PARAMETERS ANALYSIS | Franklin Merlin. R, Vignesh Sekar, Nandukumaran. P, Thirunavukarasu. V |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030019 |
|
| DESIGN OF FIXTURES FOR TESTING OF SHAFT WITH BEARING ASSEMBLY | S.Vinoth raja |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030020 |
|
| ï€ EXPERIMENTAL DESIGN AND OPTIMIZATION OF FREE ENERGY GENERATOR BY USING NEODYMIUM MAGNETS | Vinoth M A , Sivasankar P & Lingaraj N |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030021 |
|
| Improving Bicycle Design by Adopting Advanced Methods of Force or Torque Conversion And Ergonomics Principles | Mohanraj Karuppusamy |
Full Paper doi> 10.20256/IJARMATE.2017.03S09030022 |
IJARMATE.COM © 2025 All Rights Reserved. maintained by Mount Moriah Infotechs
This work by IJARMATE is licensed under a Creative Commons Attribution 4.0 International License.
